---
title: How to Enable Telnet on Windows 11
description: How to Enable Telnet on Windows 11
---
[Skip to content](https://app.atcom.plus/knowledge/telnet-windows-11#main-content)
English
Show submenu for translations
[](https://app.atcom.plus/knowledge?hsLang=en)
Open main navigation
Close main navigation
- English
Show submenu for translations
Everything ATCOM+ And Heat Trace Related.
- There are no suggestions because the search field is empty.
1. [Everything ATCOM+ and Heat Trace Related](https://app.atcom.plus/knowledge?hsLang=en)
2. [Everything Heat Trace Communication](https://app.atcom.plus/knowledge/everything-heat-trace-communication?hsLang=en)
# How to Enable Telnet on Windows 11
## How to Enable Telnet on Windows 11
### Purpose:
Telnet is a network protocol used to provide a command-line interface for communication with remote devices or servers. By default, Telnet is not enabled on Windows 11, but you can enable it easily by following these steps.
#### Step 1: Open the Settings App
1. **Press the `Windows` key** on your keyboard or click on the **Start menu**.
2. Click on the **Settings** app (you can also type `Settings` and hit `Enter`).
#### Step 2: Access Optional Features
1. In the Settings window, click on **Apps** in the left sidebar.
2. Scroll down and click on **Optional features** under the Apps & features section.
#### Step 3: Add an Optional Feature
1. In the Optional features window, click on **View features** next to **Add an optional feature**.
2. In the search bar, type `Telnet Client`.
3. Check the box next to **Telnet Client** and click **Next**.
4. Click **Install** to apply the changes.
Windows will now search for the necessary files and apply the changes. This process might take a few moments.
#### Step 4: Verify Telnet Installation
1. Once the installation is complete, you can verify that Telnet is enabled by opening the **Command Prompt**.
- Press the `Windows` key, type `cmd`, and hit `Enter` or click on **Command Prompt**.
2. In the Command Prompt window, type `telnet` and press `Enter`.
3. If Telnet is installed correctly, you will see the Telnet prompt displayed. If you receive an error message, repeat the steps above to ensure Telnet is enabled.
### Additional Tips
- **Using Telnet:** To connect to a remote Telnet server, type `telnet [hostname] [port]` in the Command Prompt, replacing `[hostname]` with the server's address and `[port]` with the appropriate port number.
- **Security Note:** Telnet transmits data in plain text, including usernames and passwords. For secure communication, consider using SSH (Secure Shell) instead of Telnet.
- [What is ATCOM+?](https://app.atcom.plus/knowledge/what-is-atcom?hsLang=en)
- [Everything ATCOM+](https://app.atcom.plus/knowledge/everything-atcom?hsLang=en)
- [Everything Heat Trace Communication](https://app.atcom.plus/knowledge/everything-heat-trace-communication?hsLang=en)
- [Heat Trace Testing & Troubleshooting](https://app.atcom.plus/knowledge/heat-trace-testing-troubleshooting?hsLang=en)
- [Heat Trace Installation](https://app.atcom.plus/knowledge/heat-trace-installation?hsLang=en)
- [Heat Trace Controllers](https://app.atcom.plus/knowledge/heat-trace-controllers?hsLang=en#main-content)
- [Thermon Controllers](https://app.atcom.plus/knowledge/heat-trace-controllers?hsLang=en#thermon-controllers)
- [nVent Controllers](https://app.atcom.plus/knowledge/heat-trace-controllers?hsLang=en#nvent-controllers)
- [Thermon Genesis Controllers](https://app.atcom.plus/knowledge/heat-trace-controllers?hsLang=en#thermon-genesis-controllers)
[](http://atcom.plus)
© 2024 Diamond Thermal Systems.